- Home
-
Products
- Torque Screwdrivers
- Screw Feeders
- Air Motors
- Air Hacksaws
- Air Tools
- ATEX Approved Tools
-
Automatic Dispensers
- Automatic Tape Dispensers
- Automatic Label Dispensers
Automatic DispensersView All Automatic Dispensers - Impact Sockets
- Catalogues
- Blog
- About
- Contact
Pneumatic | Power
Hand Guided Screw Feeders
SZG110XX
Deparg's newly updated range screw feeders for manual use consist of a torque controlled screwdriver and a sword or vibratory screw feeder.
The new Eacy Feed Feeders offer better control of the feeder's vibration, lower power consumption and the ability to work off 50Hz or 60Hz pow...
More Info
Heavy 1 Inch Impact Wrench for U/G
SMS265-1 ZAEX
High torque 1" drive impact wrench with twin hammer mechanism.
Zinc alloy housing suitable for underground mining (NOT plastic and NOT coated).
More Info
High Torque Advanced Line Motors
Low Speed, High Torque
Deprag's Low Speed, High Torque air motors feature fully sealed stainless steel housings and spindles. Perfect for mixing viscous liquids like honey, syrups in the food industry or greases and resins in potentially explosive areas. They feature heavy duty planetary gearing for applications where high start or stall torques are required.
More Info
Machine Mounted Feeders
SZG0xxx
We offer stationary screwfeeders with vibratory-drive for screws smaller than M1 up to M20. The processing of screws with a shaft-length from 5-mm up to 130-mm is possible. Also, the feeding of countersunk screw are easily processed by our vibratory feeders.
All Deprag feeders come with a compreh...
More Info
Power Line Air Motors
68-xxx
Modern, high powered air motors including a range of ATEX approved motors with IEC flanges. These pneumatic motors are available in 1.6kW, 3.2kW, 5.0kW, 6.0kW, 9 kW and 18kW sizes and most can be supplied with or without gearboxes.
More Info
Screwdrivers with supervision
Micro / Minimat F
Pneumatic Srewdrivers with additional function control.
The supevisor counts the number of screws per part, checks for torque shut off as well as the time to assemble each screw (thereby checking for loose, stripped or cross threaded screws).
If an error occurs, the controller fc20 locks-out t...
More Info
Spitznas Reciprocating Saw
51212
The Spitznas reciprocating saws are designed for cutting large pipes with the aid of a pipe clamp. They use a high powered vane motor and have a power output of 1.1kW. Ideal for heavy duty cutting of pipes upto 530mm in diameter.
These reciprocating saws us...
More Info
Stationary Spindles mounted & ready to integrate
Screwdriving Units
Wide product variety for all applications
DEPRAG screwdriver function modules excel through their wide design variety. There is a solution for every application. For example, the screwdriver function modules are available for a large torque range in both single- and multi-spindle execution.
Th...
More Info
Turbine Line Air Motors
69TX-XXX
Energy-efficient, speed-regulated turbine-powered Air motors. These motors are 40% more efficient than vane motors and eliminate uncontrolled high speed and high air consumption under no load conditions.
The perfect pneumatic drive for pumps, mixers and conveyors
More Info