Heavy duty Cengar and Spitznas pneumatic hacksaws for above ground use, for example oil refineries, offshore oil rigs, chemical industries etc. All of these pneumatic air hacksaws have ATEX approval for use around explosive gases.
The CL50 is an the all round workhorse in the Cengar range of pneumatic hacksaws. They can cut upto 150mm pipes and can be optionally supplied with a pipe clamp for square cutting.
CL50 accepts standard 1/2" hacksaw blades and can accept both the 3/4" as well as the 1/2&...
CL75 is an all round workhorse in the Cengar range of pneumatic hacksaws. They can cut upto 150mm pipes and can be optionally supplied with a pipe clamp for square cutting.
The CL75 accepts 3/4" wide blades and can accept both the 3/4" as well as the 1/2" blades sim...
Cengar CS75 for Pipes upto 150mm Dia "NEW"
CS75
Cengar's NEW CS75 boast a 20% increase in power over the CL75 for faster cutting of pipes upto 150mm in diameter.
Like all Cengar saws, the CS75 is ATEX approved for use around potentially explosve gases.
SPECIFICATIONS:
Speed  ...
This is the smallest air hacksaw in the Cengar range. It is perfect for cutting fiberglass (upto 6mm thick) and thin metals (upto 3mm thick).
A vacuum shroud is also available.
This saw uses standard 12mm (1/2") hacksaw blades.
Cengar Air Saws are known for their hig...
The JSZ is the largest saw in Cengar's pneumatic hacksaw range. They come complete with a carry case, pipe clamp for up to 300mm pipes and accept Cengar's 25mm wide blades, either 300 or 450mm long.
They run at 600 strokes per minute, with a stroke length of 57mm.
...
Cengar PL905 Pneumatic Hacksaw For Fast, Low Vibration Cutting And Production Use
The PL905 air hacksaw is a tough, low vibration saw which cuts faster than the CL saws. Perfect for free hand cutting of heavy section fibreglass and metal upto 20mm thick.
Because of it’...
Spitznas Reciprocating Saw
51212
The Spitznas reciprocating saws are designed for cutting large pipes with the aid of a pipe clamp. They use a high powered vane motor and have a power output of 1.1kW. Ideal for heavy duty cutting of pipes upto 530mm in diameter.
These reciprocating saws use ...
The Spitznas sabre saws are designed for free hand cutting. They use high a powered vane motor and have a power output of 1.0kW, for heavy duty cutting of wood upto 160mm thick or steel upto 19mm thick.
These reciprocating saws use the same blades as electric sabre...