CL75 is an all round workhorse in the Cengar range of pneumatic hacksaws. They can cut upto 150mm pipes and can be optionally supplied with a pipe clamp for square cutting.
The CL75 accepts 3/4" wide blades and can accept both the 3/4" as well as the 1/2" blades simply by changing the nosepiece.
The CL75 can handle pipes up to 150mm in diameter and has an optional pipe clamp available.
A vacuum shroud is also optionally available.
Cengar Saws are known for their high reliability and are widely used in heavy production and maintenance environments such as offshore oil and gas facilities as well as the fibreglass and boat building industries.
All Cengar saws are safe to use. They have the lowest vibration and noise levels available and all have ATEX approvals for use in potentially explosive environments.
The complete range of Cengar pneumatic hacksaws, blades and spares are kept in stock in Sydney and we have distributors all around Australia.
Speed 1,200 Strokes per min
Stroke Length 45mm
Blades CL75 19 mm wide, 150, 200, 250 & 300mm long
Air Consumption 6cfm at 90psi
Sound Pressure 82.9 dB(A)
Sound Power 82.4 dB(A)
Vibration Level 3.2m/s2
Standard Accessories Carry case, Greenoil
Optional Accessories Pipe Clamp, Power Feed Pipe Clamp, MSClean, blades, vacuum shroud
Availability Normally Ex Stock