Contact Blog
1300 769 290

Cengar | Brand

Your item has been added!

150 x 19mm blades for CL75
150 x 19mm blades for CL75
MB150
More Info
From $37.51 per pkt.
Cengar CL75 air hacksaw blades 150mm long, 19mm wide.   Please select the tpi under the "Teeth Per Inch" drop down box above.
200 x 19mm blades for CL75
200 x 19mm blades for CL75
MB200
More Info
From $43.34 per pkt.
Cengar CL75 air hacksaw blades 200mm long, 19mm wide.   Please select the tpi under the "Teeth Per Inch" drop down box above.
220x12mm blades
220x12mm blades
MC220
More Info
From $192.50 per pkt.
Cengar 1/2" red blades.  Thicker than normal hacksaw blades, made from quality bi-metal material.  To suit Cengar CL50 and PL905 air hacksaws.
250 x 19mm blades for CL75
250 x 19mm blades for CL75
MB250
More Info
From $47.96 per pkt.
Cengar CL75 air hacksaw blades 250mm long, 19mm wide.   Please select the tpi under the "Teeth Per Inch" drop down box above.
300 x 19mm blades for CL75
300 x 19mm blades for CL75
MB300
More Info
From $54.45 per pkt.
Cengar CL75 air hacksaw blades 300mm long, 19mm wide.   Please select the tpi under the "Teeth Per Inch" drop down box above.
300mm Long Blade for Cengar JSZ & JSM
300mm Long Blade for Cengar JSZ & JSM
MJ300
More Info
From $24.20 ea.
300mm (12") long blade for Cengar JSZ and JSM saws.  Available in 10-14tpi, 14tpi & 8 tpi
Cengar CL50
Cengar CL50
CL50
More Info
$1,925.00 ea.
The CL50 is an the all round workhorse in the Cengar range of pneumatic hacksaws.  They can cut upto 150mm pipes and can be optionally supplied with a pipe clamp for square cutting. CL50 accepts standard 1/2" hacksaw blades and can accept both the 3/4" as well as the 1/2&...
Cengar CL75
Cengar CL75
CL75
More Info
$1,925.00 ea.
CL75 is an all round workhorse in the Cengar range of pneumatic hacksaws.  They can cut upto 150mm pipes and can be optionally supplied with a pipe clamp for square cutting. The CL75 accepts 3/4" wide blades and can accept both the 3/4" as well as the 1/2" blades sim...
Cengar CS75 for Pipes upto 150mm Dia "NEW"
Cengar CS75 for Pipes upto 150mm Dia "NEW"
CS75
More Info
From $2,838.00 ea.
Cengar's NEW CS75 boasts a 20% increase in power over the CL75 and comes complete with a pipe clamp for faster cutting of pipes upto 150mm in diameter. Like all Cengar saws, the CS75 is ATEX approved for use around potentially explosve gases.   SPECIFICATIONS:     &...
Cengar JP901
Cengar JP901
JP901
More Info
$1,474.00 ea.
This is the smallest air hacksaw in the Cengar range.  It is perfect for cutting fiberglass (upto 6mm thick) and thin metals (upto 3mm thick). A vacuum shroud is also available.  This saw uses standard 12mm (1/2") hacksaw blades.   Cengar Air Saws are known for their hig...
Cengar JSZ
Cengar JSZ
JSZ
More Info
$4,180.00 ea.
The JSZ is the largest saw in Cengar's pneumatic hacksaw range.  They come complete with a carry case, pipe clamp for up to 300mm pipes and accept Cengar's 25mm wide blades, either 300 or 450mm long. They run at 600 strokes per minute, with a stroke length of 57mm. ...
Cengar Notched Blade
Cengar Notched Blade
MYN150
More Info
$38.50 per pkt.
150mm long Cengar blade to suit the JP901, as well as the PL905 & CL50.  For curved cuts in sheet metal or thin materials.
Cengar PL905
Cengar PL905
PL905
More Info
$1,980.00 ea.
Cengar PL905 Pneumatic Hacksaw For Fast, Low Vibration Cutting And Production Use   The PL905 air hacksaw is a tough, low vibration saw which cuts faster than the CL saws.  Perfect for free hand cutting of heavy section fibreglass and metal upto 20mm thick. Because of it’...
Cengar Tapered Blade 150 long
Cengar Tapered Blade 150 long
MYT150
More Info
$38.50 per pkt.
150mm long Cengar saw blade to suit the JP901, as well as the PL905 & CL50.  For cuts in sheet metal or thin materials.  
Cengar Underground J-Saw
Cengar Underground J-Saw
JSM
More Info
$4,840.00 ea.
The Cengar JSM comes complete with a pipe clamp for pipes and sections upto 300mm dia, as well as a carry case. It has a Zimac housing and is ATEX approved for undergound coal mines