Deprecated: strripos(): Non-string needles will be interpreted as strings in the future. Use an explicit chr() call to preserve the current behavior in C:\www\flexe\stable\require\functions.php on line 6725
Cengar | Brand
Contact Blog
1300 769 290

Cengar | Brand

Your item has been added!

Cengar CL50
Cengar CL50
CL50
More Info
$1,925.00 ea.
The CL50 is an the all round workhorse in the Cengar range of pneumatic hacksaws.  They can cut upto 150mm pipes and can be optionally supplied with a pipe clamp for square cutting. CL50 accepts standard 1/2" hacksaw blades and can accept both the 3/4" as well as the 1/2&...
Cengar CL75
Cengar CL75
CL75
More Info
$1,925.00 ea.
CL75 is an all round workhorse in the Cengar range of pneumatic hacksaws.  They can cut upto 150mm pipes and can be optionally supplied with a pipe clamp for square cutting. The CL75 accepts 3/4" wide blades and can accept both the 3/4" as well as the 1/2" blades sim...
Cengar CS75 for Pipes upto 150mm Dia "NEW"
Cengar CS75 for Pipes upto 150mm Dia "NEW"
CS75
More Info
From $2,838.00 ea.
Cengar's NEW CS75 boasts a 20% increase in power over the CL75 and comes complete with a pipe clamp for faster cutting of pipes upto 150mm in diameter. Like all Cengar saws, the CS75 is ATEX approved for use around potentially explosve gases.   SPECIFICATIONS:     &...
Cengar JP901
Cengar JP901
JP901
More Info
$1,474.00 ea.
This is the smallest air hacksaw in the Cengar range.  It is perfect for cutting fiberglass (upto 6mm thick) and thin metals (upto 3mm thick). A vacuum shroud is also available.  This saw uses standard 12mm (1/2") hacksaw blades.   Cengar Air Saws are known for their hig...
Cengar JSZ
Cengar JSZ
JSZ
More Info
$4,180.00 ea.
The JSZ is the largest saw in Cengar's pneumatic hacksaw range.  They come complete with a carry case, pipe clamp for up to 300mm pipes and accept Cengar's 25mm wide blades, either 300 or 450mm long. They run at 600 strokes per minute, with a stroke length of 57mm. ...
Cengar PL905
Cengar PL905
PL905
More Info
$1,980.00 ea.
Cengar PL905 Pneumatic Hacksaw For Fast, Low Vibration Cutting And Production Use   The PL905 air hacksaw is a tough, low vibration saw which cuts faster than the CL saws.  Perfect for free hand cutting of heavy section fibreglass and metal upto 20mm thick. Because of it’...
Cengar Underground J-Saw
Cengar Underground J-Saw
JSM
More Info
$4,840.00 ea.
The Cengar JSM comes complete with a pipe clamp for pipes and sections upto 300mm dia, as well as a carry case. It has a Zimac housing and is ATEX approved for undergound coal mines