- Home
-
Products
- Torque Screwdrivers
- Screw Feeders
- Air Motors
- Air Hacksaws
- Air Tools
- ATEX Approved Tools
-
Automatic Dispensers
- Automatic Tape Dispensers
- Automatic Label Dispensers
Automatic DispensersView All Automatic Dispensers - Impact Sockets
- Catalogues
- Blog
- About
- Contact
Pneumatic | Power
180mm, 4.5kW High Powered Turbine Angle Grinder
GAT818-450BX
Compare the power, and weight of this tool to what you are currently using. Bottom line, you will save money by using our turbine grinders.
Low weight, low maintenance, low air consumption, high power, faster material removal, longer abrasive life equals lower running costs!
Oil ...
More Info
230mm, 2.5kW Pneumatic Angle Grinder
GA823-250BX
230mm, 2.8kW, 6600rpm Barrel Grinder
GS823-280BXE
With Auto balancing unit.
For 230mm cutting disks
More Info
230mm, 4.5kW High Powered Turbine Angle Grinder
GAT823-451BX
Compare the power, air consumption and weight of this tool to what you are currently using. Bottom line, you will save money by using our turbine grinders.
Low weight, low maintenance, low air consumption, high power, faster material removal, longer abrasive life equals lower running c...
More Info
250W, 70,000rpm Straight Turbine Grinder
GDST025-700BYO
The turbine motor in this series of straight grinders means that the tool has a higher speed and lower air consumption than a standard vane motor powered straight grinder.
Especially for high speed grinding inserts. For precision grinding and milling in the tool, die and moulding workshops....
More Info
500W, 55,000rpm Straight Turbine Grinder
GDST050-550
The turbine motor in this series of straight grinders means that the tool has a higher speed and lower air consumption than a standard vane motor powered straight grinder.
Best fabrication results in foundaries, tool, die and mould making shops. Because of their high speed, these tools are ...
More Info
500W Straight Grinder
GDS050-xxx BXI
Deprag Staright design grinder with collet for heavy duty grinding.
Integrated speed regulator and ergonomic, insulated body.
Safety Lever Start.
Available in 20,000rpm, 25,000rpm or 30,000rpm versions.
More Info
Advanced Line Air Motors
67-xxx
Our extensive range of Advanced Line air motors are fully sealed, feature stainless steel housings and are ATEX approved for explosive atmospheres. Perfect pneumatic motors for Oil & Gas, Chemical and Food Industries as well as any dirty, wet or potentially explosive environments. All Advanced Line pneumatic motors feature food grade grease and viton sealed drive shafts.
More Info
Basic Line Air Motors
63-xxx
Deprag's Basic Line pneumatic motors are a budget priced range of compressed air motors with a quick change vane feature. For more details contact us. These motors are available with from 200W up to 1200W of power and loaded speeds of 16rpm up to 5000rpm
More Info
Cengar CL50
CL50
The Cengar CL50 air hacksaw is a general purpose saw that accepts standard 1/2" hacksaw blades. It is ATEX approved for use in potentially explosive areas.
More Info
Cengar CL75
CL75
The Cengar CL75 air hacksaw is a general purpose saw that can cut upto 150mm pipes. It is ATEX approved for use in potentially explosive areas.
More Info
Cengar CS75 for Pipes upto 150mm Dia "NEW"
CS75
Cengar's NEW CS75 boasts a 20% increase in power over the CL75 and comes complete with a pipe clamp for faster cutting of pipes upto 150mm in diameter.
Like all Cengar saws, the CS75 is ATEX approved for use around potentially explosve gases.
SPECIFICATIONS:
...
More Info
Cengar JP901
JP901
The Cengar JP901 air hacksaw is ATEX approved for use around potentially explosive gases and features low vibration and a short, fast stroke ideal for cutting thin materials
More Info
Cengar JSZ
JSZ
Cengar's largest saw for cutting pipes and profiles upto 300mm diameter. ATEX approved for use in the oil & gas industries.
More Info
Cengar PL905
PL905
Cengar PL905 Pneumatic Hacksaw For Fast, Low Vibration Cutting And Production Use
The PL905 air hacksaw is a tough, low vibration saw which cuts faster than the CL saws. Perfect for free hand cutting of heavy section fibreglass and metal upto 20mm thick.
Because of it&rsqu...
More Info
Cengar Underground J-Saw
JSM
The Cengar JSM comes complete with a pipe clamp for pipes and sections upto 300mm dia, as well as a carry case.
It has a Zimac housing and is ATEX approved for undergound coal mines
More Info
Deprag Pneumatic Shears
S20-180Y
Our metal shear - for the entire sheet-metal industry, for the processing of metals in the automotive-, container-, and shipbuilding industry, as well as in body shops. The shear can be used for either straightor curved incisions and is expecially well-suited for the cutting of metal sheets and co...
More Info
Deprag Reciprocating saw
SS150
Deprag's Underground Reciprocating saw is a heavy duty pneumatic saw for cutting large pipes and sections. It accepts the same blades and pipe clamp as Spitznas and Fein saws (upto 770mm long).
It's body is steel and it has ATEX approval for underground mining.
More Info
ESD safe 0.02Nm to 12Nm
Micro / Minimat ESD
ESD safe pneumatic torque controlled screwdrivers.
More Info
Hand Guided Press In Feeder
EDG16XX
The hand guided press in feeder can be used with any feedable part that does not need to be screwed in. An operator simply guides the nosepiece to when the part needs to be inserted, presses down and the part is put into place. A new part is automatically fed once the tool is lifted...
More Info