Air hacksaws are useful when materials need to be cut in hazardous areas such as oil & gas refineries, chemical factories or oil rigs as well as dusty and wet environments where electric tools are not reliable enough.
Air hacksaws are also valuable tools in production environments such as pallet repair, shipbuilding or fiberglass workshops, because with cares, they will last longer than electric tools.
All of the air hacksaws on this website are ATEX approved for hazardous areas, either for above ground or for underground mines as indicated.
We import and stock the complete range of Cengar, Spitznas and Deprag pneumatic hacksaws.
- The Cengar range includes 5 piston motor saws for cutting upto 300mm pipes.
- The Spitznas range includes a high powered air sabre saw for freehand cutting as well as a large pneumatic reciprocating saw for cutting upto 530mm diameter pipes.
- The Deprag saw is a powerful saw with underground mine ATEX approvals.
Blade for steel 3.5 to 5mm
10tpi Bi-metal blade.
Teeth milled and side set. Flexible, all-round blade for steel and stainless steel from 3.5 to 5 mm and non-ferrous metals.
Blade for steel from 1.2mm thick
24tpi Bi-metal Blade
Teeth milled and wavy set. Flexible, finely toothed saw blade for sheet metals, steel thicker than 1.2 mm. Long Lifetime.
The CL50 is an the all round workhorse in the Cengar range of pneumatic hacksaws. They can cut upto 150mm pipes and can be optionally supplied with a pipe clamp for square cutting.
CL50 accepts standard 1/2" hacksaw blades and can accept both the 3/4" as well as the 1/2&...
CL75 is an all round workhorse in the Cengar range of pneumatic hacksaws. They can cut upto 150mm pipes and can be optionally supplied with a pipe clamp for square cutting.
The CL75 accepts 3/4" wide blades and can accept both the 3/4" as well as the 1/2" blades sim...
Cengar CS75 for Pipes upto 150mm Dia "NEW"
Cengar's NEW CS75 boast a 20% increase in power over the CL75 for faster cutting of pipes upto 150mm in diameter.
Like all Cengar saws, the CS75 is ATEX approved for use around potentially explosve gases.
Cengar InLine Lubricator
All Cengar Saws and many other air tools can be fitted with our new inline oiler which holds 22mls of air tool oil, enought o lubricate a Cengar saw for a day or longer depending on your usage.
This is the smallest air hacksaw in the Cengar range. It is perfect for cutting fiberglass (upto 6mm thick) and thin metals (upto 3mm thick).
A vacuum shroud is also available.
This saw uses standard 12mm (1/2") hacksaw blades.
Cengar Air Saws are known for their hig...
The JSZ is the largest saw in Cengar's pneumatic hacksaw range. They come complete with a carry case, pipe clamp for up to 300mm pipes and accept Cengar's 25mm wide blades, either 300 or 450mm long.
They run at 600 strokes per minute, with a stroke length of 57mm.
Cengar Notched Blade
150mm long Cengar blade to suit the JP901, as well as the PL905 & CL50. For curved cuts in sheet metal or thin materials.
Cengar PL905 Pneumatic Hacksaw For Fast, Low Vibration Cutting And Production Use
The PL905 air hacksaw is a tough, low vibration saw which cuts faster than the CL saws. Perfect for free hand cutting of heavy section fibreglass and metal upto 20mm thick.
Because of it’...
Cengar Tapered Blade 150 long
150mm long Cengar blade to suit the JP901, as well as the PL905 & CL50. For cuts in sheet metal or thin materials.
Cengar Underground J-Saw
The Cengar JSM comes complete with a pipe clamp for pipes and sections upto 300mm dia, as well as a carry case.
It has a Zimac housing and is ATEX approved for undergound coal mines
Deprag Reciprocating saw
Deprag's Underground Reciprocating saw is a heavy duty pneumatic saw for cutting large pipes and sections. It accepts the same blades and pipe clamp as Spitznas and Fein saws (upto 770mm long).
It's body is steel and it has ATEX approval for underground mining.
Cengar's pneumatic pallet expander quickly and safely expands pallets so that you can cut the nails.
The expander can exert up to 270kg of force to push open pallet rungs and has a stopper to prevent the rung from flying off.
Watch the video here https://youtu.be/eGUJDw...
Pipe Clamp for CL50/75
PIpe and profile clamp to cut upto 150mm diameter pipes & profiles.
Suits Cengar CL50 & CL75 saws.
Pipe Clamp for upto 150mm Pipes for 51212
Pipe clamp for upto 325mm pipes for 51212
Spitznas Reciprocating Saw
The Spitznas reciprocating saws are designed for cutting large pipes with the aid of a pipe clamp. They use a high powered vane motor and have a power output of 1.1kW. Ideal for heavy duty cutting of pipes upto 530mm in diameter.
These reciprocating saws use ...
The Spitznas sabre saws are designed for free hand cutting. They use high a powered vane motor and have a power output of 1.0kW, for heavy duty cutting of wood upto 160mm thick or steel upto 19mm thick.
These reciprocating saws use the same blades as electric sabre...