Deprecated: strripos(): Non-string needles will be interpreted as strings in the future. Use an explicit chr() call to preserve the current behavior in C:\www\flexe\stable\require\functions.php on line 6725
Air Hacksaws for Industrial Use, Cengar and Spitznas
Contact Blog
1300 769 290

Cengar and Spitznas Pneumatic Hacksaws for Hazardous areas.

Air hacksaws are useful when materials need to be cut in hazardous areas such as oil & gas refineries, chemical factories or oil rigs as well as dusty and wet environments where electric tools are not reliable enough.

Air hacksaws are also valuable tools in production environments such as pallet repair, shipbuilding or fiberglass workshops, because with cares, they will last longer than electric tools.

All of the air hacksaws on this website are ATEX approved for hazardous areas, either for above ground or for underground mines as indicated.

We import and stock the complete range of Cengar, Spitznas and Deprag pneumatic hacksaws.

  • The Cengar range includes 5 piston motor saws for cutting upto 300mm pipes.
  • The Spitznas range includes a high powered air sabre saw for freehand cutting as well as a large pneumatic reciprocating saw for cutting upto 530mm diameter pipes.  
  • The Deprag saw is a powerful saw with underground mine ATEX approvals.

 

 

Your item has been added!

Cengar CL50
Cengar CL50
CL50
More Info
$1,925.00 ea.
The CL50 is an the all round workhorse in the Cengar range of pneumatic hacksaws.  They can cut upto 150mm pipes and can be optionally supplied with a pipe clamp for square cutting. CL50 accepts standard 1/2" hacksaw blades and can accept both the 3/4" as well as the 1/2&...
Cengar CL75
Cengar CL75
CL75
More Info
$1,925.00 ea.
CL75 is an all round workhorse in the Cengar range of pneumatic hacksaws.  They can cut upto 150mm pipes and can be optionally supplied with a pipe clamp for square cutting. The CL75 accepts 3/4" wide blades and can accept both the 3/4" as well as the 1/2" blades sim...
Cengar CS75 for Pipes upto 150mm Dia "NEW"
Cengar CS75 for Pipes upto 150mm Dia "NEW"
CS75
More Info
From $2,838.00 ea.
Cengar's NEW CS75 boasts a 20% increase in power over the CL75 and comes complete with a pipe clamp for faster cutting of pipes upto 150mm in diameter. Like all Cengar saws, the CS75 is ATEX approved for use around potentially explosve gases.   SPECIFICATIONS:     &...
Cengar JP901
Cengar JP901
JP901
More Info
$1,474.00 ea.
This is the smallest air hacksaw in the Cengar range.  It is perfect for cutting fiberglass (upto 6mm thick) and thin metals (upto 3mm thick). A vacuum shroud is also available.  This saw uses standard 12mm (1/2") hacksaw blades.   Cengar Air Saws are known for their hig...
Cengar JSZ
Cengar JSZ
JSZ
More Info
$4,180.00 ea.
The JSZ is the largest saw in Cengar's pneumatic hacksaw range.  They come complete with a carry case, pipe clamp for up to 300mm pipes and accept Cengar's 25mm wide blades, either 300 or 450mm long. They run at 600 strokes per minute, with a stroke length of 57mm. ...
Cengar PL905
Cengar PL905
PL905
More Info
$1,980.00 ea.
Cengar PL905 Pneumatic Hacksaw For Fast, Low Vibration Cutting And Production Use   The PL905 air hacksaw is a tough, low vibration saw which cuts faster than the CL saws.  Perfect for free hand cutting of heavy section fibreglass and metal upto 20mm thick. Because of it’...
Cengar Underground J-Saw
Cengar Underground J-Saw
JSM
More Info
$4,840.00 ea.
The Cengar JSM comes complete with a pipe clamp for pipes and sections upto 300mm dia, as well as a carry case. It has a Zimac housing and is ATEX approved for undergound coal mines
Deprag Reciprocating saw
Deprag Reciprocating saw
SS150
More Info
$3,740.00 ea.
Deprag's Underground Reciprocating saw is a heavy duty pneumatic saw for cutting large pipes and sections.  It accepts the same blades and pipe clamp as Spitznas and Fein saws (upto 770mm long).   It's body is steel and it has ATEX approval for underground mining.  
Spitznas Reciprocating Saw
Spitznas Reciprocating Saw
51212
More Info
$4,389.00 ea.
The Spitznas reciprocating saws are designed for cutting large pipes with the aid of a pipe clamp.  They use a high powered vane motor and have a power output  of 1.1kW.  Ideal for heavy duty cutting of pipes upto 530mm in diameter. These reciprocating saws use ...
Spitznas Sabre Saw
Spitznas Sabre Saw
51217
More Info
$3,520.00 ea.
The Spitznas sabre saws are designed for free hand cutting.  They use high a powered vane motor and have a power output  of 1.0kW, for heavy duty cutting of wood upto 160mm thick or steel upto 19mm thick. These reciprocating saws use the same blades as electric sabre...