Deprag | Brand

The hand guided press in feeder can be used with any feedable part that does not need to be screwed in.  An operator simply guides the nosepiece to when the part needs to be inserted, presses down and the part is put into place.  A new part is automatically fed once the tool is lifted...

We offer stationary screwfeeders with vibratory-drive for screws smaller than M1 up to M20. The processing of screws with a shaft-length from 5-mm up to 130-mm is possible. Also, the feeding of countersunk screw are easily processed by our vibratory feeders. All Deprag feeders come with a compreh...

Deprag’s ADVANCED LINE range of stainless steel bodied pneumatic motors are especially suited to wet areas or the food and pharmaceutical industry. These air motors are all sealed using high quality viton seals, so that dust and dirt cannot enter the motor, and contaminated air or oil ...

Low Cost Air Motors:  200 to 1,200W Deprag's Basic Line pneumatic motors are a budget priced range of ATEX approved compressed air motors with a quick change vane feature.  The motors usually do not have to be removed from the machine and don't need to be stripp...

Deprag's range of Power Line air motors consists of a comprehensive range of motors from 1.6kW upto 18kW. Modern IEC flange motors are available in 1.6kW, 3.2kW, 5.0kW, 6.0kW, 9 kW and 18kW sizes and most can be supplied with or without gearboxes.   Deprag have just released the fo...