- Home
-
Products
-
Torque Screwdrivers
- Hand Held
- Machine Mountable
- Screwdriving Units
- Screwdriving Accessories
Torque ScrewdriversView All - Screw Feeders
- Air Motors
- Air Hacksaws
- Air Tools
-
ATEX Approved Tools
- Air Drills
- Air Hacksaws
- Chisel Scalers
- Deck Hammers
- Impact Wrenches
- Needle Scalers
- Scaling Hammers
ATEX Approved ToolsView All -
Hand Tools
-
Screwdrivers
- Heavy Duty Screwdrivers
- Hex
- Pentalobe
- Phillips Drive
- Pozidriv
- Slotted
- Torx
ScrewdriversView All - Electronics Screwdrivers
- Stubby Screwdrivers
- Ratchet Drivers
- T Handle Tools
-
Allen Key Sets
- Chrome Plated
- Rainbow Powder Coated
Allen Key SetsView All - Torque Wrenches
- Tool Kits
- Misc Parts
Hand ToolsView All -
Screwdrivers
-
Automatic Dispensers
- Automatic Tape Dispensers
- Automatic Label Dispensers
Automatic DispensersView All - Impact Sockets
-
Torque Screwdrivers
- Catalogues
- Blog
- About
- Contact
Your item has been added!
x
Sign in
Cengar JP901
JP901
The Cengar JP901 air hacksaw is ATEX approved for use around potentially explosive gases and features low vibration and a short, fast stroke ideal for cutting thin materials
More Info
Minimat EC Servo - Hand Held 0.01 to 2.0Nm
Minimat EC Servo - Hand Held 0.01 to 2.0Nm
DEPRAG's EC servo screwdrivers offer maximum accuracy and process reliability. The integrated transducer for torque and angle allows the exact control and regulation of the screw tightening process as well as the documentation of important process parameters guaranteeing the highest precision. An EC-Servo screwdriver is used in applications with high safety requirements (critical screw joints), where a direct measuring system is specified.
More Info
230mm, 4.5kW High Powered Turbine Angle Grinder
GAT823-451BX
Compare the power, air consumption and weight of this tool to what you are currently using. Bottom line, you will save money by using our turbine grinders.
Low weight, low maintenance, low air consumption, high power, faster material removal, longer abrasive life equals lower running c...
More Info
250W, 70,000rpm Straight Turbine Grinder
GDST025-700BYO
The turbine motor in this series of straight grinders means that the tool has a higher speed and lower air consumption than a standard vane motor powered straight grinder.
Especially for high speed grinding inserts. For precision grinding and milling in the tool, die and moulding workshops....
More Info
500W, 55,000rpm Straight Turbine Grinder
GDST050-550
The turbine motor in this series of straight grinders means that the tool has a higher speed and lower air consumption than a standard vane motor powered straight grinder.
Best fabrication results in foundaries, tool, die and mould making shops. Because of their high speed, these tools are ...
More Info
1,000W, 28,000rpm Straight Turbine Grinder
GDST100-280BX
The turbine motor in this series of straight grinders means that the tool has a higher speed and lower air consumption than a standard vane motor powered straight grinder.
Best fabrication results in foundaries, ship building & automotive. Because of their high speed, these tools are su...
More Info
125mm, 1kW Pneumatic Angle Grinder
GA812-100BX
230mm, 2.5kW Pneumatic Angle Grinder
GA823-250BX
125mm, 1.9kW Pneumatic Angle Grinder
GA812-190BX
High Powered, egronomic air operated angle grinder.
Available early 2016.
More Info
500W Straight Grinder
GDS050-xxx BXI
Deprag Staright design grinder with collet for heavy duty grinding.
Integrated speed regulator and ergonomic, insulated body.
Safety Lever Start.
Available in 20,000rpm, 25,000rpm or 30,000rpm versions.
More Info
100mm, 2.3kW, 9500rpm Barrel Grinder
GS510-230BX
Our straight Grinder for use with flat grinding disks for heavy duty fabrication. It can also be used with steel wire brushes for removing rust etc.
More Info
150mm, 2.8kW, 6500rpm Barrel Grinder
GS515-280BX
Deprag heavy duty straight grinder for use with a flat disk or steel wire brush.
For Grinding wheels 150mm dia x 20 to 25mm thick, 20mm hole.
More Info
Cengar CS75 for Pipes upto 150mm Dia "NEW"
CS75
Cengar's NEW CS75 boasts a 20% increase in power over the CL75 and comes complete with a pipe clamp for faster cutting of pipes upto 150mm in diameter.
Like all Cengar saws, the CS75 is ATEX approved for use around potentially explosve gases.
SPECIFICATIONS:
...
More Info
ZCUT 9GR Automatic Tape Dispenser
ZCUT-9GR
Reduce wastage, improve safety and save time with a quality automatic tape dispensing machine.
The Yaesu automatic tape dispensing machine can accept upto two rolls of tape and can be programmed to cut upto 6 different length tapes simply by pressing a color coded button.
The ...
More Info
High Torque Advanced Line Motors
Low Speed, High Torque
Deprag's High Torque Advanced Line pneumatic motors have heavy planetary gearboxes to produce low speed and high torques.
The reversible motors are available in 300W, 600W and 900W, with loaded speeds down to 7rpm and max torques of up to 600Nm.
The non-reversible motors are availab...
More Info
ZCUT 10 Automatic Tape Dispenser with Folding
ZCUT-10
Reduce wastage, improve safety and save time with a quality automatic tape dispensing machine with automatic folding function.
The Yaesu automatic tape dispensing machine can accept upto two rolls of tape and can be programmed to cut upto 6 different length tapes simply by pressing ...
More Info
LDX60 Automatic Label Dispenser
LDX-60
Fast and reliable Yaesu LDX series of automatic label dispensers.Easy to adjust, fast and reliable operation. Quick release bar to remove backing paper, wing adjust dial makes it easy to adjust the label position.Choose from numerous modes for example: manual, automatic, count, pre-defi...
More Info
XCUT-150 Electric Tape Dispenser
XCUT-150
Yeasu XCUT 150 Auto tape dispenser.
Straight edge cut, designed for low noise and low vibration. Brushless motors for long life and low maintenance.
Preset counter and loop function. Memorise the number of pre programmed cutting pieces. Auto start or manual start.
For t...
More Info