Need any help?1300 769 290

Pneumatic | Power

Your item has been added!

Hand Guided Screw Feeders
Hand Guided Screw Feeders
SZG110XX
Deparg's newly updated range screw feeders for manual use consist of a torque controlled screwdriver and a sword or vibratory screw feeder.   The new Eacy Feed Feeders offer better control of the feeder's vibration, lower power consumption and the ability to work off 50Hz or 60Hz pow...
More Info
Heavy 1 Inch Impact Wrench for U/G
Heavy 1 Inch Impact Wrench for U/G
SMS265-1 ZAEX
High torque 1" drive impact wrench with twin hammer mechanism. Zinc alloy housing suitable for underground mining (NOT plastic and NOT coated).    
More Info
High Torque Advanced Line Motors
High Torque Advanced Line Motors
Low Speed, High Torque
Deprag's High Torque Advanced Line pneumatic motors have heavy planetary gearboxes to produce low speed and high torques. The reversible motors are available in 300W, 600W and 900W, with loaded speeds down to 7rpm and max torques of up to 600Nm. The non-reversible motors are availab...
More Info
Machine Mounted Feeders
Machine Mounted Feeders
SZG0xxx
We offer stationary screwfeeders with vibratory-drive for screws smaller than M1 up to M20. The processing of screws with a shaft-length from 5-mm up to 130-mm is possible. Also, the feeding of countersunk screw are easily processed by our vibratory feeders. All Deprag feeders come with a compreh...
More Info
Power Line Air Motors
Power Line Air Motors
68-xxx
Deprag's range of Power Line air motors consists of a comprehensive range of motors from 1.6kW upto 18kW. Modern IEC flange motors are available in 1.6kW, 3.2kW, 5.0kW, 6.0kW, 9 kW and 18kW sizes and most can be supplied with or without gearboxes.   Deprag have just released the fo...
More Info
Screwdrivers with supervision
Screwdrivers with supervision
Micro / Minimat F
Pneumatic Srewdrivers with additional function control. The supevisor counts the number of screws per part, checks for torque shut off as well as the time to assemble each screw (thereby checking for loose, stripped or cross threaded screws). If an error occurs, the controller fc20 locks-out t...
More Info
Spitznas Reciprocating Saw
Spitznas Reciprocating Saw
51212
The Spitznas reciprocating saws are designed for cutting large pipes with the aid of a pipe clamp.  They use a high powered vane motor and have a power output  of 1.1kW.  Ideal for heavy duty cutting of pipes upto 530mm in diameter. These reciprocating saws us...
More Info
Stationary Spindles mounted & ready to integrate
Stationary Spindles mounted & ready to integrate
Screwdriving Units
Wide product variety for all applications DEPRAG screwdriver function modules excel through their wide design variety. There is a solution for every application. For example, the screwdriver function modules are available for a large torque range in both single- and multi-spindle execution. Th...
More Info