Cengar | Brand

Cengar CL75 air hacksaw blades 150mm long, 19mm wide.   Please select the tpi under the "Teeth Per Inch" drop down box above.

Cengar CL75 air hacksaw blades 200mm long, 19mm wide.   Please select the tpi under the "Teeth Per Inch" drop down box above.

Cengar 1/2" red blades.  Thicker than normal hacksaw blades, made from quality bi-metal material.  To suit Cengar CL50 and PL905 air hacksaws.

Cengar CL75 air hacksaw blades 250mm long, 19mm wide.   Please select the tpi under the "Teeth Per Inch" drop down box above.

Cengar CL75 air hacksaw blades 300mm long, 19mm wide.   Please select the tpi under the "Teeth Per Inch" drop down box above.

300mm (12") long blade for Cengar JSZ and JSM saws.  Available in 10-14tpi, 14tpi & 8 tpi

The CL50 is an the all round workhorse in the Cengar range of pneumatic hacksaws.  They can cut upto 150mm pipes and can be optionally supplied with a pipe clamp for square cutting. CL50 accepts standard 1/2" hacksaw blades and can accept both the 3/4" as well as the 1/2&...

CL75 is an all round workhorse in the Cengar range of pneumatic hacksaws.  They can cut upto 150mm pipes and can be optionally supplied with a pipe clamp for square cutting. The CL75 accepts 3/4" wide blades and can accept both the 3/4" as well as the 1/2" blades sim...

Cengar's NEW CS75 boasts a 20% increase in power over the CL75 and comes complete with a pipe clamp for faster cutting of pipes upto 150mm in diameter. Like all Cengar saws, the CS75 is ATEX approved for use around potentially explosve gases.   SPECIFICATIONS:     &...

This is the smallest air hacksaw in the Cengar range.  It is perfect for cutting fiberglass (upto 6mm thick) and thin metals (upto 3mm thick). A vacuum shroud is also available.  This saw uses standard 12mm (1/2") hacksaw blades.   Cengar Air Saws are known for their hig...

The JSZ is the largest saw in Cengar's pneumatic hacksaw range.  They come complete with a carry case, pipe clamp for up to 300mm pipes and accept Cengar's 25mm wide blades, either 300 or 450mm long. They run at 600 strokes per minute, with a stroke length of 57mm. ...

150mm long Cengar blade to suit the JP901, as well as the PL905 & CL50.  For curved cuts in sheet metal or thin materials.

Cengar PL905 Pneumatic Hacksaw For Fast, Low Vibration Cutting And Production Use   The PL905 air hacksaw is a tough, low vibration saw which cuts faster than the CL saws.  Perfect for free hand cutting of heavy section fibreglass and metal upto 20mm thick. Because of it’...

150mm long Cengar saw blade to suit the JP901, as well as the PL905 & CL50.  For cuts in sheet metal or thin materials.  

The Cengar JSM comes complete with a pipe clamp for pipes and sections upto 300mm dia, as well as a carry case. It has a Zimac housing and is ATEX approved for undergound coal mines