Contact Blog
1300 769 290

Tag: underground tools

Cengar Universal Tools

Posted on 11 Jun, 2016
Cengar Universal Tools

Cengar started business back in 1954 in Halifax, UK.  They patented the world's first twin piston air hacksaw in 1954, and then updated it in 1964.  Since then they have added new models and worked to improve the power, reliability and vibration levels of it's saws.  Recently Cengar updated it's production equipment to again improve quality and reduce lead times.

You will find Cenagr tools in oil rigs, refineries, fibreglass manufacturers, mines and pallet repair facilities all over the world.  They are used to cut steel plate, angle sections, I-beams, bolts, sections and pipes.  All of Cengars saws have very simple, reliable piston motors which use very little air.  No vanes, no bearings, no gears!  They are ATEX approved for T5, Zone 1 hazardous area use except for the Cengar JSM, which is ATEX certified to M2 for underground coal mine use.

Please beware, there are a number of copies of the Cengar CL50 and CL75. They are copies of the old version of these saws so they do not perform as well and they do not have ATEX approvals.  Spare parts are not compatible with modern Cengar saws, and it is an issue to find spares in Australia.

Assembly Technologies Pty Ltd are the Australian importers for Cengar saws.  We usually have all of the saws, blades and spares in stock.  Repair of the saws is very simple, any air tool repair shop should be able to repair them.  In case you have difficulty, we have a full work shop and are able to repair any Cengar saw.

Cengar Air Hacksaws

 

 

 

 

 

 

 

 

 

 

 

Cutting metals safely in hazardous areas

Posted on 23 Oct, 2015
Cutting metals safely in hazardous areas

Whenever power tools are going to be used, the usual safety equipment is required such as goggles, gloves, safety shoes and ear protection the cutting of metal in hazardous areas or for long periods of time also requires additional safety considerations.

Risk of explosion:

When a tool is going to be used in a potentially explosive or hazardous area, it is not good enough to just use a "non sparking air tool".  When a risk assesment is done on any tool going into a hazardous area the basic question to ask is what is the maximum surface temperature of the tool, the blade and the material to be cut?  If explosive gases are present, what is the ignition temperature?  

Most operations will not have the facilities to rigorously test a tool's maximum surface temperature.  All of our air hacksaws are tested according to the European ATEX approvals.  This means that the tools have been independantly tested and have a coded approval marked on the tool showing the temperature class tha the tool is suitable for and what environment it is tested for (eg explosive dust or gas, industrial or mining areas).

 

Vibration:

Depending on how the saws are used, exposure to vibration levels has to be considered.  This is especially important when the saw will be used non-stop for more than half an hour.  During shut down periods in the oil and gas industries, as well as in production environments it is not uncommon for air hacksaws to be in constant use for 8 hours or more.  

Many tools have high vibration levels and according to European regulations cannot be used for more than an hour without a break.  Exceeding these vibration exposures can lead to vibration related injuries that take years to develop and are among the leading compensation claims in the EU.

Most low cost tools do not even state vibration levels, so a risk assesment should be carried out on the tool to determine whether using it for prolonged periods poses a risk to the operator.

All of our tools have their vibration levels clearly declared in their manuals and catalogues.  From these levels you can easily determine how long the tool can be used before the operator has to take a break.  If you would like more information on the vibration levels of our tools, please do not hesitate to contact us.

 

Cheap Copies:

Cheap copies of our saws are on the Australian market.  Besides being lower power, quality and life expectancy, they normally do not have ATEX approvals nor do they state their vibration levels.

 

All of our air hacksaws are ATEX approved and have very low vibration levels.

Are air tools and air motors safe for use in hazardous areas?

Posted on 17 Aug, 2015
Are air tools and air motors safe for use in hazardous areas?

Air tools and air motors are still assumed to be safe for use in explosive environments and in underground mines, but are they really?  How safe is “safe”?

The simple answer is yes, in general air tools are safe for use in hazardous areas, but not always.  Many types of cutting & grinding tools are not safe no matter what type of motor they use – for example grinders.  Other tools like drills, hacksaws, impact wrenches and air motors are widely considered to be safe. The issue is how safe are they really?

ATEX approvals show that motors and tools have been tested and are safe to use in the indicated temperature zones.

ATEX approvals show that motors and tools have been tested and are safe to use in the indicated temperature zones.

Depending on the cutting speed, some drills and air hacksaws are not safe for use in hazardous areas at all.  Also the quality of the motor and it’s components can lead to overheating of the bearings.

Some gases and dusts can explode at very low temperatures, for example carbon disulfide can ignite at 90 degC.

So what temperature does the air tool or air motor run at?

Do all air powered motors run at the same temperature?

Of course of course they don’t.

ATEX approvals were introduced in the EU to certify the safety of equipment that is going to be used in hazardous areas.  All tools and equipment that have ATEX approvals are marked with a code that identifies:

  • Which zone the equipment is safe to be used
  • What temperature range the tool operates
  • If the tool is suitable for operations where explosive gas and/or dust is present
  • Whether the tools is safe for underground or general industrial use

ATEX approvals clarify whether or not an air tool or air motor is safe to use in a particular hazardous area thereby avoiding assumptions about safety that can lead to serious injuries or catastrophic explosions.

Our full range of air hacksaws are ATEX approved some for underground, but most for above ground use.

Most of our air motors in the Advanced Line and Basic Line ranges are ATEX approved for use around explosive gases and dusts.

Our Undergound mining impact wrenches are also ATEX approved for use in underground coal mines.

Underground Impact Wrench Prices are up

Posted on 08 May, 2015

We have just updated the prices for our underground ready impact wrenches.  We know that the prices of our smaller tools are much higher than the “throw away” plastic tools that are on the market, but these are obviously not throw away tools.

The zinc alloy bodies guarantee a rugged, heavy duty, spark free tool with the peace of mind of having an ATEX approval to back you up, not just an “underground ready” statement.

In the long term our Deprag impact wrenches will save you money.

See the underground impact wrenches here