Air hacksaws are useful when materials need to be cut in hazardous areas such as oil & gas refineries, chemical factories or oil rigs as well as dusty and wet environments where electric tools are not reliable enough.
Air hacksaws are also valuable tools in production environments such as pallet repair, shipbuilding or fiberglass workshops, because with cares, they will last longer than electric tools.
All of the air hacksaws on this website are ATEX approved for hazardous areas, either for above ground or for underground mines as indicated.
We import and stock the complete range of Cengar, Spitznas and Deprag pneumatic hacksaws.
- The Cengar range includes 5 piston motor saws for cutting upto 300mm pipes.
- The Spitznas range includes a high powered air sabre saw for freehand cutting as well as a large pneumatic reciprocating saw for cutting upto 530mm diameter pipes.
- The Deprag saw is a powerful saw with underground mine ATEX approvals.
150 x 19mm blades for CL75
MB150
Cengar CL75 air hacksaw blades 150mm long, 19mm wide.
Please select the tpi under the "Teeth Per Inch" drop down box above.
200 x 19mm blades for CL75
MB200
Cengar CL75 air hacksaw blades 200mm long, 19mm wide.
Please select the tpi under the "Teeth Per Inch" drop down box above.
Cengar 1/2" red blades. Thicker than normal hacksaw blades, made from quality bi-metal material.
250 x 19mm blades for CL75
MB250
Cengar CL75 air hacksaw blades 250mm long, 19mm wide.
Please select the tpi under the "Teeth Per Inch" drop down box above.
300 x 19mm blades for CL75
MB300
Cengar CL75 air hacksaw blades 300mm long, 19mm wide.
Please select the tpi under the "Teeth Per Inch" drop down box above.
300mm HSS-SL Recip Saw Blade
925010350
Special Spitznas branded HSS-SL blade for stainless steel and hard steels. Last longer than standard HSS blades.
Dimensions 300x25x1.5, 16tpi
Made in Germany
300mm Long Blade for Cengar JSZ & JSM
MJ300
300mm (12") long blade for Cengar JSZ and JSM saws. Available in 10-14tpi, 14tpi & 8 tpi
300mm Reciprocating Saw Blade
925010610
300mm long Power hacksaw blade to suit Spitznas, Fein, CS Unitec and Deprag Power Hacksaws
Dimensions: 300x25x1.5mm, 16tpi
Fein Part number: 63503063007
Made In Germany by Spitznas
400mm HSS-SL Recip Saw Blade
925010360
Special Spitznas branded HSS-SL blade for stainless steel and hard steels. Last longer than standard HSS blades.
Dimensions 400x25x1.5, 16tpi
Made in Germany
400mm Reciprocating Saw Blade
925010620
400mm long Power hacksaw blade to suit Spitznas 51212, Fein, CS Unitec and Deprag Power Hacksaws
Dimensions: 400x25x1.5mm, 16tpi
Fein Part number: 63503064005
Made In Germany
500mm HSS-SL Recip Saw Blade
925010370
Special Spitznas branded HSS-SL blade for stainless steel and hard steels. Last longer than standard HSS blades.
Dimensions 500x28x2.0, 16tpi
Made in Germany
500mm Reciprocating Saw Blade
925010240
500mm long Power hacksaw blade to suit Spitznas 51212, Fein, CS Unitec and Deprag Power Hacksaws
Dimensions: 500x28x2.0mm, 14tpi
Fein Part number: 63503072002
Made In Germany
530mm Reciprocating Saw Blade
69
530mm long Power hacksaw blade to suit Spitznas, Fein, CS Unitec and Deprag Power Hacksaws
Dimensions: 530x28x1.5mm, 14tpi
Fein Part number: 63503069008
Made In Germany
600mm Reciprocating Saw Blade
925010460
600mm long Power hacksaw blade to suit Spitznas, Fein, CS Unitec and Deprag Power Hacksaws
Dimensions: 600x28x2.0mm, 14tpi
Fein Part number: 63503073006
Made In Germany
700mm Reciprocating Saw Blade
80
700mm long Power hacksaw blade to suit Spitznas, Fein, CS Unitec and Deprag Power Hacksaws
Dimensions: 700x28x2.0mm, 14tpi
Made In Germany
770mm HSS-SL Recip Saw Blade
925010380
Special Spitznas branded HSS-SL blade for stainless steel and hard steels. Last longer than standard HSS blades.
Dimensions 770x28x2.0, 16tpi
Made in Germany
770mm Reciprocating Saw Blade
925010300
770mm long Power hacksaw blade to suit Spitznas 51212, Fein, CS Unitec and Deprag Power Hacksaws
Dimensions: 770x28x2.0mm, 14tpi
Fein Part number: none
Made In Germany
Blade for steel 1.5 to 2.5mm thick
3014
Bi-metal blades
Teeth milled and wavy set. Flexible, all-round blade for steel and stainless steel from 1.5 to 2.5 mm.
Blade for steel 2.0 to 10 mm thick
3016
Milled, set teeth, flexible blade with innovative TWIN CUT (10/14tpi) tooth geometry, for better performance, faster cuts, metal (2.0 - 10 mm), wood with metal residues.
These blades suit the Spitznas 51217 and 51218 pneumatic sabre saws.
Blade for steel 2.5 to 3.5mm thick
3013
14tpi Bi-metal blade.
Teeth milled and wavy set. Flexible, all-round blade for steel and stainless steel from 2.5 to 3.5 mm and non-ferrous metals.
Blade for steel 3.5 to 5mm
3018
10tpi Bi-metal blade.
Teeth milled and side set. Flexible, all-round blade for steel and stainless steel from 3.5 to 5 mm and non-ferrous metals.
Blade for steel from 1.2mm thick
3015
24tpi Bi-metal Blade
Teeth milled and wavy set. Flexible, finely toothed saw blade for sheet metals, steel thicker than 1.2 mm. Long Lifetime.
The CL50 is an the all round workhorse in the Cengar range of pneumatic hacksaws. They can cut upto 150mm pipes and can be optionally supplied with a pipe clamp for square cutting.
CL50 accepts standard 1/2" hacksaw blades and can accept both the 3/4" as well as the 1/2&...
CL75 is an all round workhorse in the Cengar range of pneumatic hacksaws. They can cut upto 150mm pipes and can be optionally supplied with a pipe clamp for square cutting.
The CL75 accepts 3/4" wide blades and can accept both the 3/4" as well as the 1/2" blades sim...
Cengar CS75 for Pipes upto 150mm Dia "NEW"
CS75
Cengar's NEW CS75 boast a 20% increase in power over the CL75 for faster cutting of pipes upto 150mm in diameter.
Like all Cengar saws, the CS75 is ATEX approved for use around potentially explosve gases.
SPECIFICATIONS:
Speed ...
This is the smallest air hacksaw in the Cengar range. It is perfect for cutting fiberglass (upto 6mm thick) and thin metals (upto 3mm thick).
A vacuum shroud is also available.
This saw uses standard 12mm (1/2") hacksaw blades.
Cengar Air Saws are known for their hig...
The JSZ is the largest saw in Cengar's pneumatic hacksaw range. They come complete with a carry case, pipe clamp for up to 300mm pipes and accept Cengar's 25mm wide blades, either 300 or 450mm long.
They run at 600 strokes per minute, with a stroke length of 57mm.
...
Cengar Notched Blade
MYN150
150mm long Cengar blade to suit the JP901, as well as the PL905 & CL50. For curved cuts in sheet metal or thin materials.
Cengar PL905 Pneumatic Hacksaw For Fast, Low Vibration Cutting And Production Use
The PL905 air hacksaw is a tough, low vibration saw which cuts faster than the CL saws. Perfect for free hand cutting of heavy section fibreglass and metal upto 20mm thick.
Because of it’...
Cengar Tapered Blade 150 long
MYT150
150mm long Cengar blade to suit the JP901, as well as the PL905 & CL50. For cuts in sheet metal or thin materials.
Cengar Underground J-Saw
JSM
The Cengar JSM comes complete with a pipe clamp for pipes and sections upto 300mm dia, as well as a carry case.
It has a Zimac housing and is ATEX approved for undergound coal mines
Deprag Reciprocating saw
SS150
Deprag's Underground Reciprocating saw is a heavy duty pneumatic saw for cutting large pipes and sections. It accepts the same blades and pipe clamp as Spitznas and Fein saws (upto 770mm long).
It's body is steel and it has ATEX approval for underground mining.
Cengar's pneumatic pallet expander quickly and safely expands pallets so that you can cut the nails.
The expander can exert up to 270kg of force to push open pallet rungs and has a stopper to prevent the rung from flying off.
Watch the video here https://youtu.be/eGUJDw...
Pipe Clamp for CL50/75
CCSG3
PIpe and profile clamp to cut upto 150mm diameter pipes & profiles.
Suits Cengar CL50 & CL75 saws.
Pipe Clamp for upto 150mm Pipes for 51212
512079910
Pipe clamp for upto 325mm pipes for 51212
512029960
Spitznas Reciprocating Saw
51212
The Spitznas reciprocating saws are designed for cutting large pipes with the aid of a pipe clamp. They use a high powered vane motor and have a power output of 1.1kW. Ideal for heavy duty cutting of pipes upto 530mm in diameter.
These reciprocating saws use ...
The Spitznas sabre saws are designed for free hand cutting. They use high a powered vane motor and have a power output of 1.0kW, for heavy duty cutting of wood upto 160mm thick or steel upto 19mm thick.
These reciprocating saws use the same blades as electric sabre...
